BALL VALVES – LOW PRESSURE
GS-Hydro’s ball valves and non-return valves are designed and manufactured according to the highest standards.
Those products are used in many fields of application all over the world, e.g.
- Offshore industry
- Marine industry
- Land-based industry (test startions, steel works etc.)
Technical Data
Ball Valves are available from a bore size of 4 mm to 25 mm. End connections range from 1/8” to 1½” male or female thread; or 6 – 38 mm DIN 2353 tube fittings.
Each GS-Ball Valve is individually nitrogen-leak tested.
| Technical data | |
| Bore size, range | 4 – 25 mm |
| End connections | 1/8″ – 1½“, male or female thread 6 – 38 mm DIN 2353 tube fittings |
| Material | Temperature Rating | |
| Seals | Buna-N | -23 – 121oC |
| Viton (optional) | -23 – 200oC | |
| EPDM (optional) | -46 – 148oC | |
| Ball seats | POM-MoS2 | -30 – 100oC |
| PTFE (optional) | -54 – 232oC | |
| Body | 316Ti (DIN 1.4571) | |
| End connector | 316Ti (DIN 1.4571) | |
| Stem | 316Ti (DIN 1.4571) | |
| Ball | 316Ti (DIN 1.4571) | |
| Handle | 316 | |
| Locking system | Stainless steel |
GS-Ball Valves can also be supplied fire safe in accordance with BS6755.
Kategorie: Valves
Request a Quotation
GS-Hydro can take full responsibility of project management and offer supervisor and installation services whenever needed.
By doing this, we can secure successful on-time deliveries of complete piping systems wherever the piping project may take place.
