clamps

CLAMPS

GS-Hydro’s Tube Clamps conform to DIN 3015 and are designed to support all pipes, tubes and hoses up to 12” NB (324 mm OD). The clamps consist of two polypropylene, polyamide, aluminum or rubber clamp halves, held to a steel welding plate or mounting rail by one or more bolts through a cover plate. The GS-Multipipe Clamp allows several tubes or pipes of the same group to be stacked on top of each other.
Download catalogue
GO TO 3D COMPONENT LIBRARY
Technical data

Technical Data

The GS-Multipipe Clamp allows several tubes or pipes of the same group to be stacked on top of each other.

GS-Hydro’s Tube Clamp range includes:

  • Standard Series
  • Twin Series
  • Heavy Series

GS Tube Clamps Standard Series
DIN Group GSH Group O.D. mm Tube N.B. Inch O.D.
0 1 6 – 12 1/8 ¼ – 3/8
1 1A 6 – 12 1/8 ¼ – 3/8
2 2 12.7 – 18 ¼ – 3/8 ½ – 5/8
3 3 19 – 25 ½ ¾ – 1
4 4 26.9 – 30 ¾
5 5 32 – 42 1 – 1¼ 1¼ – 1½

 

GS Tube Clamps Twin Series
DIN Group GSH Group O.D. mm Tube N.B. Inch O.D.
1 1D 6 – 12 1/8 ¼ – 3/8
2 2D 12.7 – 18 ¼ – 3/8 ½ – 5/8
3 3D 19 – 25 ½ ¾ – 1
4 4D 26.9 – 30 ¾
5 5D 32 – 42 1 – 1¼ 1¼ – 1½

 

GS Tube Clamps Heavy Series
DIN Group GSH Group O.D. mm Tube N.B. Inch O.D.
1 3S 6-18 1/8-3/8 5/16-5/8
2 4S 19-30 1/2-3/4 3/4-1
3 5S 30-42 1-1 1/4 1 1/4-1 1/2
4 6S 38-70 1-1/4-2 1 1/2-2 1/2
5 7S 70-90 2 1/2-3 3-3 1/2
6 8S 90-127 3 1/2-4 4-5
7 9S 127-168.3 5-6 5-6 5/8
8 10S 168.3-220 8 6 5/8-8 5/8
9 11S 250-324 10-12 9 7/8-12 3/4

 

 

Request a Quotation

GS-Hydro can take full responsibility of project management and offer supervisor and installation services whenever needed.
By doing this, we can secure successful on-time deliveries of complete piping systems wherever the piping project may take place.

Contact us

vertrieb@gs-hydro.de

office@gshydro.at