BALL VALVES – HIGH PRESSURE
- Offshore industry
- Marine industry
- Land-based industry (test startions, steel works etc.)
Ball Valves are available from a bore size of 4 mm to 25 mm. End connections range from 1/8” to 1½” male or female thread; or 6 – 38 mm DIN 2353 tube fittings.
Each GS-Ball Valve is individually nitrogen-leak tested.
|Bore size, range||4 – 25 mm|
|End connections||1/8″ – 1½“, male or female thread
6 – 38 mm DIN 2353 tube fittings
|Seals||Buna-N||-23 – 121oC|
|Viton (optional)||-23 – 200oC|
|EPDM (optional)||-46 – 148oC|
|Ball seats||POM-MoS2||-30 – 100oC|
|PTFE (optional)||-54 – 232oC|
|Body||316Ti (DIN 1.4571)|
|End connector||316Ti (DIN 1.4571)|
|Stem||316Ti (DIN 1.4571)|
|Ball||316Ti (DIN 1.4571)|
|Locking system||Stainless steel|
GS-Ball Valves can also be supplied fire safe in accordance with BS6755.
Request a Quotation
GS-Hydro can take full responsibility of project management and offer supervisor and installation services whenever needed.
By doing this, we can secure successful on-time deliveries of complete piping systems wherever the piping project may take place.